Articles Directory | Free Articles | New Articles Daily | 8 Basic Steps To Assembling Your Own Paper Shredder

Assembling your own paper shredder begins by assembling all the needed tools and materials, prepping the blades, mixing the glue, preparing the scissors, applying glue to the scissors, attaching the remaining pairs of scissors, securing the handles all together, and lastly, making use of your new home-made paper shredder.

Paper shredders have become an essential tool for proper disposal of materials that have private data. Nonetheless, these devices or paper shredding services can cost a great amount of money. Good thing, though, an improvised paper shredder can easily be assembled at home with only some tools and materials. Read this article to learn the steps to making your own paper shredder.

Gather all the required tools and materials

Have all the required tools and materials for this activity in your work area. These include the following: welding glue, disposable container to mix glue in, 4 identical pairs of scissors, and heavy-duty tape.

Prepare the cutters

Purchase 4 pairs of scissors that have long blades and which have thick width at the scissors' section where the two separate parts are affixed by a screw. There should be less space in between the 2 pairs of scissors' blades when they are lined up with their screws one after the other. It is vital that you get scissors with the brand name and the design that are all the same, so that all their shapes would line up evenly. Furthermore, the rotating screws should have adequate extension so that when glue is placed on them, none of the glue will get on the inside part of the scissors. Scissors that are made entirely of metal are most fitting for this paper shredding device.

Mix the glue

Go over the instructions for the mixture of the welding glue and follow it.

Prepare the scissors

Carefully close the scissors; all four pairs of them.

Put on glue to the scissors

Have the pairs of scissors lined up top to bottom. Put a tiny amount of the glue, about the same size as a cotton swab tip, on top of the pivot screw of the 1st pair of scissors. Next, get the 2nd pair of scissors and have its pivot screw affixed to the glue on the pivot screw of the first pair of scissors. Be very careful not to allow any of the glue substance to get in the area between the two cutters. Keep the scissors glued together and maintain their parallel arrangements by holding them until the glue has set. The parallel position will allow for the creation of uniform cuts on the objects to be shredded. Allow for the glue to completely dry prior to proceeding to the next procedures.

Affix the remaining pair of scissors

Apply the same amount of glue as the previous step on the pivot screw of the third pair of scissors. Afterwards, attach this pair of scissors to the first and 2nd pair in the same procedure. Next, continue on with the last pair of scissors in the same way. Glue only one pair of scissors each time and let the glue dry thoroughly before you work on another.

Secure the handles of the scissors

Get the tape and have long strips of it pass through all the scissors' handles. Tightly wrap the tape around the handles of the four pairs of scissors; so they'll be connected together and maneuver all together as one.

Make use of your new home-made paper shredder

Get a piece of paper and try shredding it to pieces with your improvised paper shredder. Put in your thumb and your first couple of fingers through the handles of the four pairs of scissors. Next, cut the piece of paper to pieces.

Since razor-sharp items are required for this project, always take proper precautions. This device should also be kept away from children at all times.

Written by Danica Reynes. If you want to know more about paper shredding, go to http://www.tntshredding.com/services/document-shredding/